News — kitchen knives

If you want to protect your knives, acacia is usually kinder to the blade than maple, while high quality moso bamboo can match maple for edge wear if you use it correctly. In simple terms: for most home cooks, acacia is slightly better than maple for knife friendliness, and moso bamboo is slightly harder on edges but more eco-friendly and very practical if you sharpen your knives every 3 to 6 months. Bamboo vs acacia vs maple: what actually touches your knife? When you cut, three numbers matter more than anything else: Hardness: Maple sits around 1450 lbf on the...

If you want the best balance between knife protection and durability, a medium maple board with a Janka hardness around 1450 is slightly kinder to knives than acacia at around 1750, but a well finished acacia board will still keep a quality chef's knife sharp for 6 to 12 months of daily use with regular honing. In practical terms, both maple and acacia are safe for knives if you choose the right thickness, grain and finish, and look after them properly. Maple vs acacia: which is better for your knives? When people ask about maple vs acacia chopping board knives,...

If you want to keep a sharp kitchen knife edge for 6 to 12 months between professional sharpenings, the single biggest factor is your chopping board. Hard glass or stone boards can dull a quality knife in as little as 2 or 3 uses, while a well chosen wooden or bamboo board can protect that same edge for years. Why do some chopping boards ruin knives so quickly? In simple terms, some chopping boards are too hard or too rough for the fine metal edge on your knives. Every time you cut, the blade meets resistance. If that surface is...

If you want to protect your knives for 5 to 10 years of regular home use, high quality end grain or close grained wood usually treats the edge more gently than most synthetic boards, although soft synthetic boards can be kinder than very hard or cheap wood. In simple terms: for long term knife protection, a well made wooden board will normally beat a synthetic one. Wood vs synthetic: what actually touches your knife edge? Every time your knife hits a board, the edge either bites slightly into the surface or skids on top of it. This contact is what...