News — kitchen knives

If you want to keep kitchen knives sharp for 5 to 10 years of regular home use, the best material for a chopping board is end grain or edge grain wood, such as bamboo or acacia, with a hardness between roughly 1,100 and 1,600 Janka. In practical terms, a well made bamboo or acacia cutting board will blunt your knives noticeably less than glass, marble or very hard plastic. Why wood is kinder to knife edges than glass or plastic Every time your knife hits a chopping board, the edge either bites slightly into the surface or skids across it....

If you care most about keeping your knives sharp, a well made maple cutting board is usually kinder to the blade than acacia, because maple tends to sit around 1,450 Janka hardness while acacia can reach 1,700 or more. In simple terms, maple is slightly softer and more forgiving, so edge retention over 5 to 10 years of daily use is often better on maple than on very hard acacia wood. Maple vs acacia: which cutting board is better for knives? When you compare maple vs acacia cutting board options for knives, the key factor is hardness. Your knife edge...

If you are asking what the best teak cutting board for knives is, the honest answer is that a well made medium hardwood board with similar properties to teak, such as the Deer & Oak Large Acacia Board at 45x35cm and 2.1kg, will protect your knives just as well as premium teak while often costing less and lasting 5 to 10 years with simple care. Why people look for the best teak cutting board for knives Teak is popular because it is a medium hardness tropical hardwood with natural oils and relatively low porosity. In practice that means two things...

If you want the best thick wooden chopping boards for knives, look for boards that are at least 3 cm thick, around 45x35 cm in size, and made from forgiving woods like bamboo or acacia that keep knives sharper for 5 to 10 years of regular home use. What actually makes a chopping board the best for your knives? The best thick wooden chopping board for knives solves three problems at once: it protects your blades from chipping, it stays stable on the worktop, and it resists warping or cracking over time. In practical terms, that usually means: Thickness of...